Before surface treatment of hotel furniture, a series of pre-treatment work is required to ensure the effect and adhesion of the surface treatment. The following are common pre-treatment tasks before surface treatment:

       1. Cleaning: First clean the surface completely to remove dust, grease, dirt and other impurities. Cleaning can be done using detergents and solvents to ensure a clean surface.

       2. Remove the old coating: If there is already a coating on the surface, the old coating needs to be removed so that the new surface treatment can adhere well to the surface. Methods such as sandblasting, chemical corrosion or mechanical grinding can be used.

       3. Repair and filling: Check whether there are scratches, dents, cracks and other defects on the surface of hotel furniture that need to be repaired and filled. Fillers and paste repair materials can be used to fill in surface defects.

       4. Polishing: Polish the surface to make it smooth and even, so that the surface treatment can be well coated on the furniture.

       5. Anti-rust treatment: Carry out anti-rust treatment on the metal parts to avoid surface rust and corrosion.

       6. Remove moisture: Make sure the surface is completely dry. Removing moisture is very important for the surface treatment effect.

       7. Dust removal: Before surface treatment, the surface needs to be dusted to ensure that the surface is clean and dust-free.

       Through the above pretreatment work, the surface preparation of hotel furniture can be completed to ensure that subsequent surface treatment can proceed smoothly and achieve good results and adhesion.
       Please indicate the source for reprinting:http://www.hxf0892.com